ECLS-I-MM-1
The following standards are intended for use with the New Jersey Department of Health Method ECLS-I-MM-1 Standard Operating Procedure for the Screening of Marijuana for Toxic Metals by Inductively Coupled Plasma Mass Spectrometry. This method is based on the analysis method described in US EPA Method 200.8 and SW846 sample preparation Method 3050B. Review the method here.
CANNA-ECLSIMM1-IS
| Part #: | CANNA-ECLSIMM1-IS |
|---|---|
| Description: | Internal Standard (10.11) |
| Methods: | ECLS-I-MM-1 |
| Intended Use: | ICP-MS |
| Matrix: | 1% HNO3 |
0.5 mg/L: Bi, In, Sc, Tb
CANNA-ECLSIMM1-CAL
| Part #: | CANNA-ECLSIMM1-CAL |
|---|---|
| Description: | Muli-element stock standard 10.5 |
| Methods: | ECLS-I-MM-1 |
| Intended Use: | ICP-MS |
| Matrix: | 2% HNO3 / tr tartaric acid |
20 mg/L: Ag, Al, As, Ba, Be, Cd, Co, Cr3, Cu, Mn, Mo, Ni, Pb, Sb, Se, Th, Tl, U, V, Zn
IV-STOCK-74
| Part #: | IV-STOCK-74 |
|---|---|
| Description: | Performance check for Agilent 8900 |
| Methods: | ECLS-I-MM-1 |
| Intended Use: | ICP-MS |
| Matrix: | 5% HNO3 |
1 ug/L: Ce, Co, Li, Mg, Tl, Y
